Trang chủ CHÈO THUYỀN THUYỀN - CANOE Phụ kiện Thuyền

Động cơ Gladiator G15FHS

Mã SP :PK0910082Z
Trạng thái :Còn hàng

37.500.000 VNĐ

(0)

Đặt hàng nhanh Gọi điện xác nhận và giao hàng tận nơi

090.4906.848 Hotline tư vấn mua hàng

Chat facebook /umove.vn

UMOVECAM KẾT

100%

SẢN PHẨM CÓ BẢO HÀNH

ĐỔI HÀNG TRONG 7 NGÀY

GIAO HÀNG NHANH

GIẢM GIÁ TỔNG 8% CHO THÀNH VIÊN

Mô tả sản phẩm Động cơ Gladiator G15FHS

GLADIATOR G15FHS with power 15 hp

Brand	Gladiator
Weight, kg	38
Model	G15FHS
Engine Type	two-stroke
Power, hp	15
Displacement, cc	246
Number Of Cylinders	2
Engine Stroke Cycles Type	two-stroke
Foot Size, mm	S, 381

GLADIATOR G15FHS — 2-cycle outboard boat motor with power 15 h.p.

The motor is powered by an external fuel tank, which is connected to the fuel hose through quick-release connectors (it is possible to switch from one side to the other without turning off the engine). A pre-prepared mixture is used as fuel (pre-mixing) in a ratio of 50:1 (for 50 liters of gasoline – 1 liter of oil). To facilitate the start of a cold engine , an air damper is provided in the carburetor design. To control the operation of the cooling system, a special nozzle is installed on the motor pallet. To maintain a stable operating temperature the engine has a built-in thermostat in the cooling system.

The motor is started by a manual starter and controlled by a standard tiller with a rotary throttle handle (motorcycle-type trigger) with anti-slip notches.

A lock is provided on the manual starter, which does not allow starting the motor when the gear is switched on (starting is possible only on neutral). Gear shifting is carried out by a lever in the front of the motor. The lever has three positions – forward, neutral, backward. The engine stop button is located on the tiller, it is equipped with an emergency shutdown safety check.

The design of the motor clamp allows you to adjust the operating angle of attack (4 positions), as well as to fix the motor in one of two positions of movement in shallow water and fully raised position. A loop is provided on the clamp for fastening the safety rope.

The motor has the ability to adjust the force of turning left-right and the force of turning the throttle handle (trigger).

As an option, a voltage regulator rectifier can be installed on the motor for recharging.