Trang chủ CHÈO THUYỀN THUYỀN - CANOE Phụ kiện Thuyền

Động cơ Gladiator G9.8FHS

Mã SP :PK0910081Z
Trạng thái :Còn hàng

29.900.000 VNĐ

(0)

Đặt hàng nhanh Gọi điện xác nhận và giao hàng tận nơi

090.4906.848 Hotline tư vấn mua hàng

Chat facebook /umove.vn

UMOVECAM KẾT

100%

SẢN PHẨM CÓ BẢO HÀNH

ĐỔI HÀNG TRONG 7 NGÀY

GIAO HÀNG NHANH

GIẢM GIÁ TỔNG 8% CHO THÀNH VIÊN

Mô tả sản phẩm Động cơ Gladiator G9.8FHS

GLADIATOR G9.8FHS with power 9.8 hp

Brand	Gladiator
Weight, kg	26
Model	G9.8FHS
Engine Type	two-stroke
Power, hp	9.8
Displacement, cc	169
Number Of Cylinders	2
Engine Stroke Cycles Type	two-stroke
Foot Size, mm	S, 381

GLADIATOR G 9.8FHS — 2-cycle outboard boat motor with power 9.8 h.p.

The motor is powered by an external fuel tank, which is connected to the fuel hose through quick-release connectors (it is possible to switch from one side to the other without turning off the engine). A pre-prepared mixture is used as fuel (pre-mixing) in a ratio of 50:1 (for 50 liters of gasoline – 1 liter of oil).

To facilitate the start of a cold engine, an air damper is provided in the carburetor design. To control the operation of the cooling system, a special nozzle is installed on the motor. To maintain a stable operating temperature of the engine, a thermostat is built into the cooling system.

The motor is started by a manual starter and controlled by a standard tiller with a rotary throttle handle (motorcycle-type trigger) with anti-slip notches.

A lock is provided on the manual starter, which does not allow starting the motor when the gear is switched on (starting is possible only on neutral).

Gear shifting is carried out by a lever on the right side of the motor. The lever has three positions – forward, neutral, backward. The engine stop button is located on the tiller, it is equipped with an emergency shutdown safety check.

The design of the motor clamp allows you to adjust the operating angle of attack (5 positions), as well as to fix the motor in the position of movement in shallow water and fully raised position. A loop is provided on the clamp for fastening the safety rope.

The motor has the ability to adjust the force of turning left-right and the force of turning the throttle handle (trigger).